A circular economy perspective on sustainable supply chain management: an updated survey
DOI:
https://doi.org/10.21638/11701/spbu05.2018.204Аннотация
Социально-экологические последствия развития мировой экономики привлекают возрастающее внимание общественности на глобальном уровне. Общество ожидает от бизнеса ответственного отношения к окружающей среде и ее ресурсам, а также к людям для достижения целей устойчивого развития. Цепи поставок, рассматриваемые в качестве существенного звена современной экономики, представляют собой сети взаимосвязанных компаний, которые создают и доставляют продукты и услуги конечным потребителям. Авторы статьи предлагают классификацию исследований в области устойчивого управления цепями поставок и дают обзор научных работ в контексте циркулярной экономики, предметом которых являются так называемые замкнутые цепи поставок. На основе проведенного анализа представлена обновленная классификация работ в этой научной области, при составлении которой использован подход к структурированию исследований, первоначально предложенный А. Атасу и соавторами в 2008 г. В работе дано описание методов аналитического моделирования и поддержки принятия решений, используемых в научной литературе и на практике, а также приведены полученные с их помощью выводы. Среди источников литературы предпочтение отдается исследованиям, реализующим интегрированный подход к управлению замкнутыми цепями поставок путем решения задач проектирования и координации цепей поставок, в том числе с учетом операционных аспектов управления. Авторами выявляются взаимосвязи между возникшими с течением времени новыми направлениями исследований, а также обозначаются перспективные области анализа
Ключевые слова:
управление цепями поставок, замкнутые цепи поставок, ремануфактуринг, устойчивость
Скачивания
Данные скачивания пока недоступны.
Библиографические ссылки
Литература на русском языке
References in Latin Alphabet
Abbey J. D., Kleber R., Souza G. C., Voigt G. The Role of Perceived Quality Risk in Pricing Remanufactured Products. Production and Operations Management, 2017, vol. 26, no. 1, pp. 100–115.
Agrawal V. V., Atasu A., van Ittersum K. Remanufacturing, Third-Party Competition, and Consumers’ Perceived Value of New Products. Management Science, 2015, vol. 61, no. 1, pp. 60–72.
Ahi P., Searcy C. A comparative literature analysis of definitions for green and sustainable supply chain management. Journal of Cleaner Production, 2013, vol. 52, pp. 329–341.
Akcalı E., Cetinkaya S. Quantitative models for inventory and production planning in closed-loop supply chains. International Journal of Production Research, 2011, vol. 49, no. 8, pp. 2373–2407.
Akçalı E., Çetinkaya S., Üster H. Network design for reverse and closed-loop supply chains: An annotated bibliography of models and solution approaches. Networks, 2009, vol. 53, no. 3, pp. 231–248.
Alshamsi A., Diabat A. A Genetic Algorithm for Reverse Logistics network design: A case study from the GCC. Journal of Cleaner Production, 2017, vol. 151, pp. 652–669.
Alshamsi A., Diabat A. A reverse logistics network design. Journal of Manufacturing Systems, 2015, vol. 37, no. 3, pp. 589–598.
Alumur S. A., Nickel S., Saldanha-Da-Gama F., Verter V. Multi-period reverse logistics network design. European Journal of Operational Research, 2012, vol. 220, no. 1, pp. 67–78.
Ansari Z. N., Kant R. A state-of-art literature review reflecting 15 years of focus on sustainable supply chain management. Journal of Cleaner Production, 2017, vol. 142, pp. 2524–2543.
Atasu A., Cetinkaya S. Lot Sizing for Optimal Collection and Use of Remanufacturable Returns over a Finite Life-Cycle. Production and Operations Management, 2006, vol. 15, no. 4, pp. 473–487.
Atasu A., Guide V. D. R., Van Wassenhove L. N. Product Reuse Economics in Closed-Loop Supply Chain Research. Production and Operations Management, 2008, vol. 17, no. 5, pp. 483–496.
Atasu A., Guide V. D. R., Van Wassenhove L. N. So What If Remanufacturing Cannibalizes My New Product Sales? California Management Review, 2010, vol. 52, no. 2, pp. 56–76.
Atasu A., Toktay L. B., Van Wassenhove L. N. How Collection Cost Structure Drives a Manufacturer’s Reverse Channel Choice. Production and Operations Management, 2013, vol. 22, no. 5, pp. 1089–1102.
Atasu A., Van Wassenhove L. N., Sarvary M. Efficient Take-Back Legislation. Production and Operations Management, 2009, vol. 18, no. 3, pp. 243–258.
Aydin R., Kwong C. K., Ji P. Coordination of the closed-loop supply chain for product line design with consideration of remanufactured products. Journal of Cleaner Production, 2016, vol. 114, pp. 286–298.
Ayvaz B., Bolat B., Aydın N. Stochastic reverse logistics network design for waste of electrical and electronic equipment. Resources, Conservation and Recycling, 2015, vol. 104, pp. 391–404.
Banerjee A. A joint economic-lot-size model for purchaser and vendor. Decision Sciences, 1986, vol. 17, no. 3, pp. 292–311.
Bazan E., Jaber M. Y., Zanoni S. Carbon emissions and energy effects on a two-level manufacturer-retailer closed-loop supply chain model with remanufacturing subject to different coordination mechanisms. International Journal of Production Economics, 2017, vol. 183, pp. 394–408.
Benjaafar S., Li Y., Daskin M. Carbon footprint and the management of supply chains: Insights from simple models. IEEE Transactions on Automation Science and Engineering, 2013, vol. 10, no. 1, pp. 99–116.
Beske-Janssen P., Johnson M. P., Schaltegger S. 20 Years of Performance Measurement in Sustainable Supply Chain Management — What Has Been Achieved? Supply Chain Management: An International Journal, 2015, vol. 20, no. 6, pp. 664–680.
Bhattacharya S., Guide V. D. R., Wassenhove L. N. Optimal Order Quantities with Remanufacturing Across New Product Generations. Production and Operations Management, 2006, vol. 15, no. 3, pp. 421–431.
Braglia M., Zavanella L. Modelling an industrial strategy for inventory management in supply chains: The “Consignment Stock” case. International Journal of Production Research, 2003, vol. 41, no. 16, pp. 3793–3808.
Brandenburg M., Govindan K., Sarkis J., Seuring S. Quantitative models for sustainable supply chain management: Developments and directions. European Journal of Operational Research, 2014, vol. 233, no. 2, pp. 299–312.
Bulmus S. C., Zhu S. X., Teunter R. Competition for cores in remanufacturing. European Journal of Operational Research, 2014a, vol. 233, no. 1, pp. 105–113.
Bulmuş S. C., Zhu S. X., Teunter R. H. Optimal core acquisition and pricing strategies for hybrid manufacturing and remanufacturing systems. International Journal of Production Research, 2014b, vol. 52, no. 22, pp. 6627–6641.
Cachon G. P. Supply Chain Coordination with Contracts. Eds Kok de A. G., Graves S. C. Supply Chain Management: Design, Coordination and Operation. Handbooks in Operations Research and Management Science, vol. 11. Amsterdam, Elsevier, 2003, pp. 227–339.
Carter C. R., Easton P. L. Sustainable supply chain management: evolution and future directions. International Journal of Physical Distribution & Logistics Management, 2011, vol. 41, no. 1, pp. 46–62.
Cetinkaya B., Cuthbertson R., Ewer G., Klaas-Wissing T., Piotrowicz W., Tyssen C. Sustainable Supply Chain Management: Practical Ideas for Moving Towards Best Practice. Berlin, Springer, 2011, XVIII+283 pp.
Chen L., Zhao X., Tang O., Price L., Zhang S., Zhu W. Supply chain collaboration for sustainability: A literature review and future research agenda. International Journal of Production Economics, 2017, vol. 194, pp. 73–87.
Choi T.-M., Li Y., Xu L. Channel leadership, performance and coordination in closed loop supply chains. International Journal of Production Economics, 2013, vol. 146, no. 1, pp. 371–380.
Christopher M. Logistics and Supply Chain Management. 4th ed. Harlow, Pearson, 2011, 288 pp.
Chuang C.-H., Wang C. X., Zhao Y. Closed-loop supply chain models for a high-tech product under alternative reverse channel and collection cost structures. International Journal of Production Economics, 2014, vol. 156, pp. 108–123.
De Giovanni P., Reddy P. V., Zaccour G. Incentive strategies for an optimal recovery program in a closed-loop supply chain. European Journal of Operational Research, 2016, vol. 249, no. 2, pp. 605–617.
De Giovanni P., Zaccour G. A two-period game of a closed-loop supply chain. European Journal of Operational Research, 2014, vol. 232, no. 1, pp. 22–40.
Dekker R., Fleischmann M., Inderfurth K., Van Wassenhove L. N. (Eds). Reverse Logistics: Quantitative Models for Closed-Loop Supply Chains. Springer, Berlin, 2004, VIII+436 p.
Diabat A., Abdallah T., Henschel A. A closed-loop location-inventory problem with spare parts consideration. Computers and Operations Research, 2015, vol. 54, pp. 245–256.
Directive 2003/87/EC of the European Parliament and of the Council of 13 October 2003 establishing a scheme for greenhouse gas emission allowance trading within the Community. European Commission.Official Journal of the European Union, 2003, vol. 46, no. L 275, pp. 32–46.
Directive 2012/27/EU of the European Parliament and of the Council of 25 October 2012 on energy efficiency. European Commission. Official Journal of the European Union, 2012, vol. 55, no. L 315, pp. 1–56.
Directorate-General for Climate Action. EU ETS Handbook. European Commission. Brussels, 2015. Available at: https://ec.europa.eu/clima/sites/clima/files/docs/ets_handbook_en.pdf (accessed: 29.03.2018).
Dobos I., Gobsch B., Pakhomova N., Pishchulov G., Richter K. Design of contract parameters in a closed-loop supply chain. Central European Journal of Operations Research, 2013, vol. 21, no. 4, pp. 713–727.
Dobos I., Pishchulov G., Gossinger R. How to control a reverse logistics system when used items return with diminishing quality. Eds Kliewer N., Ehmke J. F., Borndorfer R. Operations Research Proceedings 2017. Berlin, Springer, 2018, forthcoming.
El Saadany A. M. A., Jaber M. Y., Bonney M. How many times to remanufacture? International Journal of Production Economics, 2013, vol. 143, no. 2, pp. 598–604.
Elkington J. Enter the Triple Bottom Line. The triple bottom line : does it all add up? : assessing the sustainability of business and CSR. Eds Henriques A., Richardson J. London, Earthscan, 2004, pp. 1–16.
Elkington J. Towards the Sustainable Corporation: Win-Win-Win Business Strategies for Sustainable Development. California Management Review, 1994, vol. 36, no. 2, pp. 90–100.
Eskandarpour M., Dejax P., Miemczyk J., Péton O. Sustainable supply chain network design: An optimizationoriented review. Omega, 2015, vol. 54, pp. 11–32.
Feng Y., Zhu Q., Lai K.-H. Corporate social responsibility for supply chain management: A literature review and bibliometric analysis. Journal of Cleaner Production, 2017, vol. 158, pp. 296–307.
Ferguson M. E., Toktay L. B. The Effect of Competition on Recovery Strategies. Production and Operations Management, 2006, vol. 15, no. 3, pp. 351–368.
Ferrer G., Swaminathan J. M. Managing new and differentiated remanufactured products. European Journal of Operational Research, 2010, vol. 203, no. 2, pp. 370–379.
Ferrer G., Swaminathan J. M. Managing New and Remanufactured Products. Management Science, 2006, vol. 52, no. 1, pp. 15–26.
Fleischmann M., Bloemhof-Ruwaard J. M., Dekker R., van der Laan E., van Nunen J. a. E. E., Van Wassenhove L. N. Quantitative models for reverse logistics: A review. European Journal of Operational Research, 1997, vol. 103, no. 1, pp. 1–17.
Fugenschuh A., Martin A. Computational Integer Programming and Cutting Planes. Eds Aardal K., Nemhauser G., Weismantel R. Discrete Optimization. Handbooks in Operations Research and Management Science, vol. 12. Amsterdam, North Holland, 2005, pp. 69–121.
Gao J., Han H., Hou L., Wang H. Pricing and effort decisions in a closed-loop supply chain under different channel power structures. Journal of Cleaner Production, 2016, vol. 112, pp. 2043–2057.
Geissdoerfer M., Savaget P., Bocken N. M. P., Hultink E. J. The Circular Economy — A new sustainability paradigm? Journal of Cleaner Production, 2017, vol. 143, pp. 757–768.
Gomes M. I., Barbosa-Povoa A. P., Novais A. Q. Modelling a recovery network for WEEE: A case study in Portugal. Waste Management, 2011, vol. 31, no. 7, pp. 1645–1660.
Govindan K., Fattahi M., Keyvanshokooh E. Supply chain network design under uncertainty: A comprehensive review and future research directions. European Journal of Operational Research, 2017, vol. 263, no. 1, pp. 108–141.
Govindan K., Popiuc M. N. Reverse supply chain coordination by revenue sharing contract: A case for the personal computers industry. European Journal of Operational Research, 2014, vol. 233, no. 2, pp. 326–336.
Govindan K., Soleimani H., Kannan D. Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future. European Journal of Operational Research, 2015, vol. 240, no. 3, pp. 603–626.
Guide V. D. R., Van Wassenhove L. N. The Evolution of Closed-Loop Supply Chain Research. Operations Research, 2009, vol. 57, no. 1, pp. 10–18.
Guo S., Shen B., Choi T.-M., Jung S. A review on supply chain contracts in reverse logistics: Supply chain structures and channel leaderships. Journal of Cleaner Production, 2017, vol. 144, pp. 387–402.
Harrington L. Closing the loop: Building the environmental supply chain. Bonn, DHL Supply Chain, 2014, 24 p. Available at: http://supplychain.dhl.com/Enviro-Resilience (accessed: 29.03.2018).
Hong X., Wang Z., Wang D., Zhang H. Decision models of closed-loop supply chain with remanufacturing under hybrid dual-channel collection. The International Journal of Advanced Manufacturing Technology, 2013, vol. 68, no. 5–8, pp. 1851–1865.
Ilgin M. A., Gupta S. M. Environmentally conscious manufacturing and product recovery (ECMPRO): A review of the state of the art. Journal of Environmental Management, 2010, vol. 91, no. 3, pp. 563–591.
Jaber M. Y., Zanoni S., Zavanella L. E. A consignment stock coordination scheme for the production, remanufacturing and waste disposal problem. International Journal of Production Research, 2014, vol. 52, no. 1, pp. 50–65.
Jaehn F. Sustainable Operations. European Journal of Operational Research, 2016, vol. 253, no. 2, pp. 243–264.
Jonrinaldi, Zhang D. Z. An integrated production and inventory model for a whole manufacturing supply chain involving reverse logistics with finite horizon period. Omega, 2013, vol. 41, no. 3, pp. 598–620.
Khatami M., Mahootchi M., Farahani R. Z. Benders’ decomposition for concurrent redesign of forward and closed-loop supply chain network with demand and return uncertainties. Transportation Research Part E: Logistics and Transportation Review, 2015, vol. 79, pp. 1–21.
Kim K., Jeong B., Jung H. Supply chain surplus: Comparing conventional and sustainable supply chains. Flexible Services and Manufacturing Journal, 2014, vol. 26, no. 1–2, pp. 5–23.
Kim T., Glock C. H. On the use of RFID in the management of reusable containers in closed-loop supply chains under stochastic container return quantities. Transportation Research Part E: Logistics and Transportation Review, 2014, vol. 64, pp. 12–27.
Koppius O., Ozdemir Akyıldırım O., Laan E. van der. Business Value from Closed-loop Supply Chains. International Journal of Supply Chain Management, 2014, vol. 3, no. 4, pp. 107–120.
Krapp M., Kraus J. B. Coordination contracts for reverse supply chains: a state-of-the-art review. Journal of Business Economics, 2017 (in press). doi: 10.1007/s11573-017-0887-z.
Krass D., Nedorezov T., Ovchinnikov A. Environmental taxes and the choice of green technology. Production and Operations Management, 2013, vol. 22, no. 5, pp. 1035–1055.
Kumar V. N. S. A., Kumar V., Brady M., Garza-Reyes J. A., Simpson M. Resolving forward-reverse logistics multi-period model using evolutionary algorithms. International Journal of Production Economics, 2017, vol. 183, no. B, pp. 458–469.
Kyoto Protocol to the United Nations Framework Convention on Climate Change, 2005. United Nations Treaty Collection. Registration Number 30822. URL: https://treaties.un.org/Pages/showDetails.aspx?objid=0800000280021a16 (accessed: 29.03. 2018).
Laporte G., Louveaux F. V. The integer L-shaped method for stochastic integer programs with complete recourse. Operations Research Letters, 1993, vol. 13, no. 3, pp. 133–142.
Lee H. L., Tang C. S. Socially and Environmentally Responsible Value Chain Innovations: New Operations Management Research Opportunities. Management Science, 2018, vol. 64, no. 3, pp. 983–996.
Linton J. D., Klassen R., Jayaraman V. Sustainable supply chains: An introduction. Journal of Operations Management, 2007, vol. 25, no. 6, pp. 1075–1082.
Lopes de Sousa Jabbour A. B., Jabbour C. J. C., Godinho Filho M., Roubaud D. Industry 4.0 and the circular economy: a proposed research agenda and original roadmap for sustainable operations. Annals of Operations Research, 2018, in press. doi: 10.1007/s10479-018-2772-8.
Louveaux F. V., Schultz R. Stochastic Integer Programming. Eds Ruszczyński A., Shapiro A. Handbooks in Operations Research and Management Science: Stochastic Programming, vol. 10. Amsterdam, Elsevier, 2003, pp. 213–266.
Maiti T., Giri B. C. A closed loop supply chain under retail price and product quality dependent demand. Journal of Manufacturing Systems, 2015, vol. 37, pp. 624–637.
Maiti T., Giri B. C. Two-way product recovery in a closed-loop supply chain with variable markup under price and quality dependent demand. International Journal of Production Economics, 2017, vol. 183, no. A, pp. 259–272.
Montreal Protocol on Substances that Deplete the Ozone Layer. United Nations. United Nations Treaty Series, 1989, vol. 1522, no. 26369, pp. 29–40.
Mutha A., Bansal S., Guide V. D. R. Managing Demand Uncertainty through Core Acquisition in Remanufacturing. Production and Operations Management, 2016, vol. 25, no. 8, pp. 1449–1464.
Oeser G. Risk-Pooling Essentials. Cham, Springer, 2015, IX+91 pp.
Orsdemir A., Kemahlıoğlu-Ziya E., Parlakturk A. K. Competitive Quality Choice and Remanufacturing. Production and Operations Management, 2014, vol. 23, no. 1, pp. 48–64.
Osborne M. J., Rubinstein A. A Course in Game Theory. Cambridge, Massachusetts, The MIT Press, 1994, 368 pp.
Ozkır V., Başlıgıl H. Modelling product-recovery processes in closed-loop supply-chain network design. International Journal of Production Research, 2012, vol. 50, no. 8, pp. 2218–2233.
Pakhomova N. V., Richter K. K., Vetrova M. A. Transition To Circular Economy and Closed-Loop Supply Chains As Driver of Sustainable Development. St Petersburg University Journal of Economic Studies, 2017, vol. 33, no. 2, pp. 244–268.
Pishchulov G., Dobos I., Gobsch B., Pakhomova N., Richter K. A vendor–purchaser economic lot size problem with remanufacturing. Journal of Business Economics, 2014, vol. 84, no. 5, pp. 749–791.
Rajeev A., Pati R. K., Padhi S. S., Govindan K. Evolution of sustainability in supply chain management: A literature review. Journal of Cleaner Production, 2017, vol. 162, pp. 299–314.
Report of the Conference of the Parties on its twenty-first session, held in Paris from 30 November to 13 December 2015. Addendum. Part two: Action taken by the Conference of the Parties at its twenty-first session. United Nations Framework Convention on Climate Change (UNFCCC), Document No. FCCC/CP/2015/10/Add.1. Geneva, 29.01. 2016. 36 p. Available at: http://unfccc.int/resource/docs/2015/cop21/eng/10a01.pdf (accessed: 29.03.2018).
Report of the World Commission on Environment and Development. United Nations.Official Document System of the United Nations, Document No. A/42/427. Geneva, August 4, 1987. Available at: https://documentsdds-ny.un.org/doc/UNDOC/GEN/N87/184/67/img/N8718467.pdf (accessed: 29.03.2018).
Richter K. Pure and mixed strategies for the EOQ repair and waste disposal problem. OR Spektrum, 1997, vol. 19, no. 2, pp. 123–129.
Richter K. The EOQ repair and waste disposal model with variable setup numbers. European Journal of Operational Research, 1996, vol. 95, no. 2, pp. 313–324.
Robson A. Australia’s Carbon Tax: An Economic Evaluation. Economic Affairs, 2014, vol. 34, no. 1, pp. 35–45.
Saha S., Sarmah S. P., Moon I. Dual channel closed-loop supply chain coordination with a reward-driven remanufacturing policy. International Journal of Production Research, 2016, vol. 54, no. 5, pp. 1503–1517.
Sahyouni K., Savaskan R. C., Daskin M. S. A Facility Location Model for Bidirectional Flows. Transportation Science, 2007, vol. 41, no. 4, pp. 484–499.
Savaskan R. C., Bhattacharya S., Van Wassenhove L. N. Closed-Loop Supply Chain Models with Product Remanufacturing. Management Science, 2004, vol. 50, no. 2, pp. 239–252.
Savaskan R. C., Van Wassenhove L. N. Reverse Channel Design: The Case of Competing Retailers. Management Science, 2006, vol. 52, no. 1, pp. 1–14.
Seuring S. A review of modeling approaches for sustainable supply chain management. Decision Support Systems, 2013, vol. 54, no. 4, pp. 1513–1520.
Seuring S., Muller M. From a literature review to a conceptual framework for sustainable supply chain management. Journal of Cleaner Production, 2008, vol. 16, no. 15, pp. 1699–1710.
Silver E. A., Pyke D. F., Thomas D. J. Inventory and production management in supply chains. 4th ed. Boca Raton, CRC Press, 2016. 782 p.
Slaper T., Hall T. The Triple Bottom Line: What Is It and How Does It Work? Indiana Business Review, 2011, vol. 86, no. 1, pp. 4–8.
Souza G. C. Closed-Loop Supply Chains: A Critical Review, and Future Research. Decision Sciences, 2013, vol. 44, no. 1, pp. 7–38.
Sridhar K., Jones G. The three fundamental criticisms of the Triple Bottom Line approach: An empirical study to link sustainability reports in companies based in the Asia-Pacific region and TBL shortcomings. Asian Journal of Business Ethics, 2013, vol. 2, no. 1, pp. 91–111.
Srivastava S. K. Network design for reverse logistics. Omega, 2008, vol. 36, no. 4, pp. 535–548.
Stock J. R., Boyer S. L. Developing a consensus definition of supply chain management: a qualitative study. International Journal of Physical Distribution & Logistics Management, 2009, vol. 39, no. 8, pp. 690–711.
Subramanian R., Ferguson M. E., Beril Toktay L. Remanufacturing and the Component Commonality Decision. Production and Operations Management, 2013, vol. 22, no. 1, pp. 36–53.
Tang C. S., Zhou S. Research advances in environmentally and socially sustainable operations. European Journal of Operational Research, 2012, vol. 223, no. 3, pp. 585–594.
Teunter R. H. Economic ordering quantities for recoverable item inventory systems. Naval Research Logistics, 2001, vol. 48, no. 6, pp. 484–495.
Teunter R. H., Flapper S. D. P. Optimal core acquisition and remanufacturing policies under uncertain core quality fractions. European Journal of Operational Research, 2011, vol. 210, no. 2, pp. 241–248.
Transforming our world: the 2030 Agenda for Sustainable Development. United Nations. Official Document System of the United Nations, Document No. A/RES/70/1. Geneva, October 21, 2015. Available at: https://documents-dds-ny.un.org/doc/UNDOC/GEN/N15/291/89/pdf/N1529189.pdf (accessed: 29.03.2018).
Wu X., Zhou Y. The optimal reverse channel choice under supply chain competition. European Journal of Operational Research, 2017, vol. 259, no. 1, pp. 63–66.
Wu Z., Pagell M. Balancing priorities: Decision-making in sustainable supply chain management. Journal of Operations Management, 2011, vol. 29, no. 6, pp. 577–590.
Xiong Y., Zhao Q., Zhou Y. Manufacturer-remanufacturing vs supplier-remanufacturing in a closed-loop supply chain. International Journal of Production Economics, 2016, vol. 176, pp. 21–28.
Xiong Y., Zhou Y., Li G., Chan H.-K., Xiong Z. Don’t forget your supplier when remanufacturing. European Journal of Operational Research, 2013, vol. 230, no. 1, pp. 15–25.
Yenipazarli A. Managing new and remanufactured products to mitigate environmental damage under emissions regulation. European Journal of Operational Research, 2016, vol. 249, no. 1, pp. 117–130.
Yuan K. F., Gao Y. Inventory decision-making models for a closed-loop supply chain system. International Journal of Production Research, 2010, vol. 48, no. 20, pp. 6155–6187.
Yuan K. F., Ma S. H., He B., Gao Y. Inventory decision-making models for a closed-loop supply chain system with different decision-making structures. International Journal of Production Research, 2015, vol. 53, no. 1, pp. 183–219.
Zeng A. Z. Coordination mechanisms for a three-stage reverse supply chain to increase profitable returns. Naval Research Logistics, 2013, vol. 60, no. 1, pp. 31–45.
Zimmer K., Frohling M., Schultmann F. Sustainable supplier management — a review of models supporting sustainable supplier selection, monitoring and development. International Journal of Production Research, 2016, vol. 54, no. 5, pp. 1412–1442.
Translation of references in Russian into English
Загрузки
Опубликован
29.06.2018
Как цитировать
Пищулов, Г. В., Рихтер, К., Пахомова, Н. В., & Ценжарик, М. К. (2018). A circular economy perspective on sustainable supply chain management: an updated survey. Вестник Санкт-Петербургского университета. Экономика, 34(2), 267–297. https://doi.org/10.21638/11701/spbu05.2018.204
Выпуск
Раздел
Экономика фирмы, производственный менеджмент и управление цепочками поставок
Лицензия
Статьи журнала «Вестник Санкт-Петербургского университета. Экономика» находятся в открытом доступе и распространяются в соответствии с условиями Лицензионного Договора с Санкт-Петербургским государственным университетом, который бесплатно предоставляет авторам неограниченное распространение и самостоятельное архивирование.
